Types of Work Involved

  • FlooringFlooring
  • Groundwork & Civil EngineeringGroundwork & Civil Engineering

The Project

Adamson Construction was briefed by the client to remove and replace the existing flooring with a durable, easy to clean flooring system. The existing vinyl flooring had de-bonded allowing dirty water to penetrate the sub-floor causing foul smells and trip hazard issues.

The first task was to remove the sheet vinyl flooring and scarify the sub-base. Once the floor was sufficiently prepared, a cement-based latex was laid to level the sub-base, then a tack coat primer was applied on top.

A quartz aggregate was then scattered onto the wet primer to create a physical bond. This was then allowed to cure overnight before a second tack coat primer was mixed and applied.

Finally, the floor coating, a Flowcrete, Flowshield S/L, was mixed and applied at 4mm thick. This was applied using the back roll technique with spiked rollers to remove any air pockets.

    Request a call back

    For an initial chat and a no-obligation quote, contact us on 01753 534826


    Adamson Construction are proud to be accredited with the following: